Sight Tape Compound
$14.90
In stock
Description
15 different calibration tapes
- Sight in your bow with only two yardage marks
(Example: 20 and 50 yds) - Laminated waterproof face
- Yardages range from 12 to 100 yards
- Adhesive self-stick backing
- Scale range for most bows
- Compounds (240-310 fps) based on Actual FPS not IBO
How to use this tape
- Make sure your sight is compatible with sight tapes
- Install a piece of paper with tape over the top so it won’t rip (this is a calibration tape) you can also just cut a small blank section out of the label provided.
- Sight in your arrows at 20y or 20m and make a mark on the calibration sight tape
- Work your way backwards to as far as you can comfortably shoot and get accurate groupings the further back the better calibrated your sight will be, keep within your limits if you can group constantly beyond 40y / 40m then don’t go further for your calibration.
- Mark your calibration tape a second time at your longest comfortable distance (assume 50y / 50m)
- Move your sight back to the 20y / 20m position and lock your sight so it wont move.
- Remove the calibration tape and line up your calibration tape with the LCA printed sight tapes ensuring the 20 and 50 as in the same position on both the LCA tape and your calibration tape.
- Cut off your selected LCA tape and align the 20y / 20m mark on your LCA tape with your 20m sight marker on your sight and proceed to install the tape.
- test your sight tape
